Breathe Underwater

I needed to reset the config of a bunch of Motorola APs and unfortunately the documentation isn’t readily available. Here is the easiest way when you can get access to the console.

• 1. The console settings are 19200/8/n/2
• 2. Once the boot process hit ESC and this will take you to the boot menu.
• 3. type reset config
• 4. Once this is done type reboot

You have now reset the config.  Below is a capture of the process.

AP7131 Boot Firmware Version 4.0.3.0-010R, CPLD Revision 3.19
Copyright(c) Motorola Inc. 2006-2009. All rights reserved.
Press escape key to run boot firmware ….

boot> reset config
. done

. done

. done

. done

. done

. done

. done

. done

. done

. done

. done

. done

boot> reboot